At Maumee Valley Fabricators, we specialize in custom equipment skid fabrication for a variety of processing applications. This mixing system skid was developed for our customer in the roofing industry. The system contains a pressure vessel to mix the limestone solids with the adhesive or sealant in preparation for application to roofing shingles. The system measures 8' x 12' x 15' high and is fabricated from A36 carbon steel and carbon steel pipe. The steel and pipe were cut using our band saws and plasma burners and components were custom formed and welded with fabrication tolerances of ±1/8".
The system was assembled with an ASME code pressure vessel and all pipes were pressure tested to ensure the system met all safety ...
Maumee Valley Fabricators completed this custom plate rolling and fabrication project for our customer in the foundry industry. This recuperative heat exchanger is 66" in diameter and 52' long. It is used to capture exhaust gas exiting the foundry and utilizes the residual heat in the gas to preheat the combustion air, providing the foundry with a fuel savings of up to 30%. The heat exchanger was fabricated from a combination of stainless steels. The outer shell was rolled to the desired diameter while the inner components were formed on our press brake.
After fabricating the individual components, both TIG and MIG welding were used to complete the entire heat exchanger assembly. Fabrication tolerances on this one of a kind ...
Maumee Valley Fabricators provides custom equipment fabrication for a variety of industries. This sprue crusher was designed for the foundry industry. The crusher is used to crush scrap and the sprue from iron, aluminum and brass castings. Crushing this waste increases the bulk density of the material and allows the foundry to store the same weight of feed material in a much smaller volume of space as well as have a much more uniform sized feedstock.
The crusher is made from a combination of carbon steel and steel castings. Each unique component was formed, cut, and milled using our press brake, boring mill, and plate rolling equipment before the final assembly was welded by our certified welders. After fabrication and ...
Maumee Valley Fabricators performs custom process equipment fabrication for customers in a variety of industries. This 27' x 6' x 21.5' tall electrolytic cleaning tank was fabricated for the steel industry. The tank is used to remove rust from steel using an electrolyte solution. We welcome challenging projects and are proud of the way our entire manufacturing staff came together to complete this large scale fabrication project. The tank is made of carbon steel and required pre-machining inspection of the tank halves before assembly as well as final inspection of the completed tank.
Tank components were cut and bent to tolerances of ±.005" using our plasma cutting table and press brake equipment. The components were then ...
At Maumee Valley Fabricators, we welcome challenging heavy steel fabrication projects. This weigh deck and transfer car was fabricated for our customer in the steel mill industry. The deck and car is used to transfer the steel ladles from the scrap yard to the mill furnace. All components were subject to pre-machining inspection to ensure that material and dimensions were to customer specifications.
This project gave us the opportunity to employ the full range of our fabrication capabilities including forming, bending, cutting, milling, turning, and welding. The deck and car is made of carbon steel and fabricated to tolerances of ±.005" and underwent both in-process and final inspection throughout the fabrication process. ...
